Ornate Naturale

EWD 80 - 80Kg/hour

EWD 100 - 100Kg/hour

EWD 200 - 200Kg/hour

EWD 250 - 250Kg/hour

EWD 500 - 500Kg/hour

We also design and implement the stack as per requirement of the client and can extend the same up to 30 meters if required.

"The Dual-Chamber Incinerator has been designed so as to meet the standards specified in Schedule II (b) of the Solid Waste Management Rules April 2016."

There is a 1 1/2 inch threaded opening at the top portion of the chimney for facilitating insertion of probe by competent authorities for sample testing.

Build Specifications

KILLWASTE^®

SPECIFICATION – PRIMARY/SECONDARY Chamber

Material	Non-Corrosive mild carbon steel of IS2062 - GRADE B category Cylindrical Chamber as specified by BIS, 8mm thickness manufactured by Jindal Steel / Equivalent with Nano Technology Based space craft surface paint.
Dimension	Dia: 900mm, Height: 1000mm, Thickness: 6mm. (Cylindrical part only. Upper and bottom conical area not included)
Thermal Insulation	Inner phase: High quality Imported Fire Cement Concrete (CALDRY’S/ARHEAT-K) Thermally treated and Cured IS8 FIRE BRICKS laid with Premier ACCOSET 50 fine refractory cement with Ceramic Coating. Outer phase: with 50mm thick ceramic wool of Morgan Cerablanket 1260 C (Density-64kg/m³). Protected with 1.0mm thick Aluminum plate Of HINDALCO (22 gauge) Upper conical area made of mild steel plate of 6 mm thickness and height 600mm, lined inside with imported fire cement concrete (thermally treated).
Erection	Erected upon four legs made of high-quality TATA steel Equivalent pipe of dia. 100mm and thickness 8mm scheduled 40 seamless pipes at 1000mm above ground level
Other Features	Waste loading door, cleaning door, peep hole, ash chamber with door
Volume	0.99 cubic metre

POLLUTION CONTROL DEVICE -100 kg/hr

SPECIFICATION – Wet Scrubber

Description	Multi- level pollution control water double scrubbing system, with depressurized water saving technology. Consumption – 1.6 Liters / Min
Material	Non-Corrosive mild carbon steel of IS2062 - GRADE B category Cylindrical Chamber as specified by BIS, manufactured by Jindal Steel/ Equivalent Thickness: 4mm/6mm
Erection	Erected upon four legs made of TATA / JINDAL / Equivalent Brand of dia. 2”and thickness 5mm
Materials used	Flanges Type - E Size - 5”, 8”,10” Coupling Type - Schedule 40 Size - 2” Inlet Water Pipe Type - ‘C’ Class Brand - TATA/JINDAL/ Equivalent Size - ½” Discharge Water Pipe Type - ‘C’ Class Brand - TATA/JINDAL/ Equivalent, Size - 2”
POLLUTION CONTROL MONITORING SYSTEM	Outdoor Monitoring Device: Features: Advanced Sensors; measures PM 2.5, PM 10, SO2, NO2, Temp, Humidity 7 Segment display of 1 x1 foot. Displayed parameters: PM2.5, PM10, SO2, NO2,CO2 Access air pollution data on Web with 1 year subscription

KILLWASTE^®- 250 kg/hr

SPECIFICATION – PRIMARY/SECONDARY Chamber

Thermal Insulation	Inner phase: High quality Imported Fire Cement Concrete (CALDRY’S/ARHEAT-K) thermally treated and cured IS8 FIRE BRICKS laid with Premier ACCOSET 50 Fine Refractory Cement with Ceramic Coating. Outer phase: with 100mm thick glass wool (Density- 64kg/m³). Protected with 1.0mm thick Aluminum plate (22 gauge) Brand: HINDALCO
Erection	Erected upon four legs made of TATA/JINDAL/ Equivalent Brand of dia. 100MM and thickness 6mm SCHEDULE 40 SEAMLESS PIPE.
Materials used	1.V- Hook Material – G.I, Thickness – 5mm 2.Flange Type – E, Size – 10”, Thickness – 12mm 3.Nut-Bolts Stainless Steel High Tension
Ladder	With handrails & platform Material – Steel Tube G.I Brand: TATA/ Equivalent Width: 80cm
Volume	1.5 cubic metre

Thermal Insulation	Inner phase: High quality Imported Fire Cement Concrete (CALDRY’S/ARHEAT-K) thermally treated and cured IS8 FIRE BRICKS laid with Premier ACCOSET 50 Fine Refractory Cement with Ceramic Coating. Outer phase: with 100mm thick glass wool (Density- 64kg/m³). Protected with 1.0mm thick Aluminum plate (22 gauge) Brand: HINDALCO
Erection	Erected upon four legs made of TATA/JINDAL/ Equivalent Brand of dia. 100MM and thickness 6mm SCHEDULE 40 SEAMLESS PIPE.
Materials used	1.V- Hook Material – G.I, Thickness – 5mm 2.Flange Type – E, Size – 10”, Thickness – 12mm 3.Nut-Bolts Stainless Steel High Tension
Ladder	With handrails & platform Material – Steel Tube G.I Brand: TATA/ Equivalent Width: 80cm
Volume	1.5 cubic metre

CHIMNEY

Material	STAINLESS STEEL PIPE GR. 304
Dimension	Dia: 300MM thick: 5mm
Effective Height	10 metres (Chimney only) Additional height if required will be charged extra, including L a b o u r , flanges, nut-bolt, erection, transportation etc. SS Stack will be charged extra
Additional Neck support	Double core technique Inner: 10” Seamless Pipe Schedule 40, Brand: TATA/JINDAL/ Equivalent Outer: 12” Seamless Pipe Schedule 40, Brand: TATA/JINDAL/ Equivalent
Diffuser with water drain	Pipe Dia: 12”, Thickness: 3mm

POLLUTION CONTROL DEVICE - 250Kg/hr

SPECIFICATION – PRIMARY/SECONDARY Chamber

Description	Multi- level pollution control water double scrubbing system, with depressurized water saving technology. Consumption – 1.6 Liters/Min
Material	Non-Corrosive mild carbon steel of IS2062-GRADE B category Cylindrical Chamber as specified by BIS, manufactured by Jindal Steel/ Equivalent Thickness: 4mm/6mm
Erection	Erected upon four legs made of TATA/JINDAL/ Equivalent Brand of dia. 2”and thickness 5mm
Materials used	Flanges Type – E Size – 5”, 8”,10” Coupling Type- Schedule 40 Size -2” Inlet Water Pipe Type- ‘C’ Class Brand – TATA/JINDAL/ Equivalent Size – ½” Discharge Water Pipe Type- ‘C’ Class Brand - TATA/JINDAL/ Equivalent, Size – 2”
POLLUTION CONTROL MONITORING SYSTEM	Outdoor Monitoring Device: Features: Advanced Sensors; measures PM 2.5, PM 10, SO2, NO2, Temp, Humidity 7 Segment display of 1 x1 foot. Displayed parameters: PM2.5, PM10, SO2, NO2,CO2 Access air pollution data on Web with 1 year subscription

KILLWASTE^® - 500 kg/hr (250 Twin)

Specifications – PRIMARY/SECONDARY Chamber

Material	Non-Corrosive mild carbon steel of IS2062-GRADE B category Cylindrical Chamber as specified by BIS, manufactured by Jindal Steel/Equivalent with Nano Technology based space craft surface paint Thickness: 8mm
Dimension	Upper cone Dia. 1250mm, height: 1200mm, thickness: 8mm Cylindrical Chamber Dia. 1250mm, height: 1500mm, thick: 8mm Lower cone Dia. 1250mm, height: 800mm, thickness: 8mm Loading door Height: 400mm Width: 450mm Inspection door Height: 150mm Width: 250mm Ash door Size: 400mm
Air Rotating Technology (ART)	Air chamber with stem Non-Corrosive mild carbon steel of IS2602-GRADE B category Brand: Jindal Thickness: 8mm Pipe size: 2.5” Seamless (Schedule 40) Thickness: 5mm, Brand: TATA/JINDAL/Equivalent Air Chamber Pipe size: 8” Seamless pipe Thickness: 5mm, Brand: TATA/JINDAL/Equivalent Air inlet pipe size: 1.25” Additional air intake (Steel Tube 2”x1”) Brand: TATA/ Equivalent, Thickness: 1.6mm Additional Air Supply Unit Pipe Size: ½” Schedule 40 Seamless Pipe at four discharge points. Brand: TATA/JINDAL/ Equivalent Secondary Burning chamber Pipe size: 1.5”, Thickness: 4mm
Thermal Insulation	Inner phase: High quality Imported Fire Cement Concrete with Ceramic Coating (CALDRY’S, ARHEAT-K) thermally treated and cured IS8 FIRE BRICKS laid with Premier Accoset 50 fine Refractory Cement Outer phase: with 100mm thick glass wool (Density- 64kg/m³). Protected with 1.0mm thick Aluminum plate (22 gauge) Brand: HINDALCO Upper Conical Area made of mild steel plate of 6mm thickness and 600mm height, lined with imported fire cement concrete (thermally insulated)
Erection	Erected upon four legs made of TATA/JINDAL/ Equivalent Brand of dia. 100MM and thickness 6mm SCHEDULE 40 SEAMLESS PIPES.
Materials used	1.V- Hook Material – G.I, Thickness – 5mm 2.Flange Type – E, Size – 10”, Thickness – 12mm 3.Nut-Bolts Stainless Steel High Tension
Ladder	With handrails & platform Material – Steel Tube G.I Brand: TATA/ Equivalent Width: 80cm
Volume	1.5 cubic metre

CHIMNEY

Material	STAINLESS STEEL PIPE GR. 304
Dimension	Dia: 300MM thick: 5mm
Effective Height	10 metres (Chimney only) Additional height if required will be charged extra, including labour, flanges, nut-bolt, erection, transportation etc. SS Stack will be charged extra
Additional Neck support	Double core technique Inner: 10” Seamless Pipe Schedule 40, Brand: TATA/JINDAL/ Equivalent Outer: 12” Seamless Pipe Schedule 40, Brand: TATA/JINDAL/ Equivalent
Diffuser with water drain	Pipe Dia: 12”, Thickness: 3mm

POLLUTION CONTROL DEVICE - 500Kg/hr

SPECIFICATIONS: Wet Scrubber

Description	Multi- level pollution control water double scrubbing system, with depressurized water saving technology. Consumption – 1.6 Liters/Min
Material	Non-Corrosive mild carbon steel of IS2062-GRADE B category Cylindrical Chamber as specified by BIS, manufactured by Jindal Steel/ Equivalent Thickness: 4mm/6mm
Erection	Erected upon four legs made of TATA/JINDAL/ Equivalent Brand of dia. 2”and thickness 5mm
Materials used	Flanges Type – E Size – 5”, 8”,10” Coupling Type- Schedule 40 Size -2” Inlet Water Pipe Type- ‘C’ Class Brand – TATA/JINDAL/ Equivalent Size – ½” Discharge Water Pipe Type- ‘C’ Class Brand - TATA/JINDAL/ Equivalent, Size – 2”
POLLUTION CONTROL MONITORING SYSTEM	Outdoor Monitoring Device: Features: Advanced Sensors; measures PM 2.5, PM 10, SO2, NO2, Temp, Humidity 7 Segment display of 1 x1 foot. Displayed parameters: PM2.5, PM10, SO2, NO2,CO2 Access air pollution data on Web with 1 year subscription

Note: "All equipments are provided with 1.5 inch threaded nozzle at the chimney for inspection by competent/statutory Authorities as per CPCB norms".

Quick Links

Quick Contact